Pretty sure most here would ask how you accomplished this to replicate it, not fix it.
griffin724 on
If it was fully off that would be good too but I’m just stuck with half an A and an A. Should I just rip it off or what? Rock one giant A lke I’m the assistant captain of the hockey team?
Ju5hin on
Tear the ugly thing off completely, then use a fabric paint to paint them blue or white.
420SwaggyZebra on
Red logo falling off not the worst situation tbh…
Fournier_Gang on
It’s an improvement.
For all the good he’s done Tottenham as a business, Levy choosing a kit sponsor that’s red is maddening.
Vladimir_Putting on
South East Asia completely melted the AIA off my 18/19 home kit.
There is a kind of ghost image of it if you look really closely but no color or texture difference of any kind.
I think it’s actually my favorite kit now.
Ok-Upstairs-5254 on
Have the same kit and the Romero came off the back…maybe bc the fabric is ribbed?
secret_rye on
It’s vas you don’t like the red isn’t it?
CanadianBirdo on
Could try using fabric glue?
Also for future reference, make sure to not use the dryer and to use only warm or colder water when washing kits. The heat is what makes the prints come off.
BruinEric on
If they make a kit with NO sponsor, not a peeled off with remnants, I will be thrilled.
divinetrackies on
I think have the red on the kit is a curse
The_Big_Boobinsky on
Same thing happened to me. I just tore the rest off and rolled with it. I was surprised though by how shitty the quality of the shirt was, given that this happened after just a few washes.
Entropy907 on
Letters coming off … just like the wheels
Proof_Square6325 on
Happened on all my jerseys since the switch from under armour lol
sijtli on
That’s a feature not a bug
Donnelding0 on
It’s a heat transfer so your best bet is to replace. If you really want to you can peel off the remaining, wash off residue, and then print out the sponsor on heat transfer get a press and reapply. Big project but it can turn into a rewarding hobby.
Fuzzie_Lee on
I think using a tumble dryer increases the risk of this happening.
daaave33 on
The AIA on my authentic yellow jersey lasted 3 washes inside-out. They’re a bit of shit.
Lionsault on
For anyone who sees this, you should never put a jersey/kit in the dryer. Wash inside out and hang/air dry every time.
Raziel-Reaver on
I’ve always wondered why can’t we have AIA logo in blue on the home kit? They allow that in the away and 3rd kits, so what’s the difference?
Frostyballschilly on
DH gate ones don’t peel
Fuck-off-bryson on
Idk how to fix it, and not sure if you’ve done this specifically, but for everyone in the thread YSK that kits should be washed on cold, then air dried. Washing or drying with heat is usually what causes peeling like this
neildunabie on
Grease proof paper and an iron. It’ll warm the glue back up and reattach them. Same as last year’s kit. 🤨
24 Comments
Rip it off and live the dream
Pretty sure most here would ask how you accomplished this to replicate it, not fix it.
If it was fully off that would be good too but I’m just stuck with half an A and an A. Should I just rip it off or what? Rock one giant A lke I’m the assistant captain of the hockey team?
Tear the ugly thing off completely, then use a fabric paint to paint them blue or white.
Red logo falling off not the worst situation tbh…
It’s an improvement.
For all the good he’s done Tottenham as a business, Levy choosing a kit sponsor that’s red is maddening.
South East Asia completely melted the AIA off my 18/19 home kit.
There is a kind of ghost image of it if you look really closely but no color or texture difference of any kind.
I think it’s actually my favorite kit now.
Have the same kit and the Romero came off the back…maybe bc the fabric is ribbed?
It’s vas you don’t like the red isn’t it?
Could try using fabric glue?
Also for future reference, make sure to not use the dryer and to use only warm or colder water when washing kits. The heat is what makes the prints come off.
If they make a kit with NO sponsor, not a peeled off with remnants, I will be thrilled.
I think have the red on the kit is a curse
Same thing happened to me. I just tore the rest off and rolled with it. I was surprised though by how shitty the quality of the shirt was, given that this happened after just a few washes.
Letters coming off … just like the wheels
Happened on all my jerseys since the switch from under armour lol
That’s a feature not a bug
It’s a heat transfer so your best bet is to replace. If you really want to you can peel off the remaining, wash off residue, and then print out the sponsor on heat transfer get a press and reapply. Big project but it can turn into a rewarding hobby.
I think using a tumble dryer increases the risk of this happening.
The AIA on my authentic yellow jersey lasted 3 washes inside-out. They’re a bit of shit.
For anyone who sees this, you should never put a jersey/kit in the dryer. Wash inside out and hang/air dry every time.
I’ve always wondered why can’t we have AIA logo in blue on the home kit? They allow that in the away and 3rd kits, so what’s the difference?
DH gate ones don’t peel
Idk how to fix it, and not sure if you’ve done this specifically, but for everyone in the thread YSK that kits should be washed on cold, then air dried. Washing or drying with heat is usually what causes peeling like this
Grease proof paper and an iron. It’ll warm the glue back up and reattach them. Same as last year’s kit. 🤨